CET

Overview


Career Paths

 

Agricultural
City, County, State
Construction
Consulting
Defense
Mining
Renewable Energy
Water Management

Job Placement Rate from 2000-Present is 100%. The Median Starting Salary is $45,000 with under government and $60,000 under private.

  • Civil Design
  • Cost Estimator
  • Design Engineer
  • Engineer for Land Development
  • Engineer for Public Works
  • Field Engineer
  • Project Engineer
  • Project Manager
  • Project Supervisor
 

Curriculum

Students must complete all University degree requirements which can see be seen with full details on the CET Catalogs Page. A 2018-2019 Flowchart is provided to provide a better understanding of the required classes and the prerequisites.  Degree requirements include: General Education requirements, Viewing a Wider World requirements, and elective credits to total at least 120 credits with 48 credits in courses numbered 300 or above. Developmental coursework will not count towards the degree requirements and/or elective credits, but may be needed in order to take the necessary English and Mathematics coursework. A typical 4-year graduation plan can be seen below.

View Areas
See the General Education section of this catalog for a full list of courses
  • Area I: Communications
  • Area II: Mathematics
  • Area III: Laboratory Sciences
  • Area IV: Social/Behavioral Science
  • Area V: Humanities
  • Area VI: Fine Arts
  • TE: See the Technical Electives section for a full list of courses
  • VWW: See the Viewing Wider World section for a full list of courses
  • Elective: Credit may vary based on prerequisites, dual credit, AP credit, double majors, and/or minor coursework. Students should discuss elective requirements with their advisor.

To get individualized reports and reflect on the academic progress toward the degree, use the STAR Audit Report. This tool can be used to show what credits are missing by using a checklist. This can calculate the GPA and show what kind of courses still need to taken.

 

Fall Spring Fall Spring Fall Spring Fall Spring
ENGR 100 (3) ENGL 111G (4) DRFT 109 (3) E T 308
308 L(4)
E T 310
310 L(4)
E T 332 (4) E T 432 (4) E T 418 (3)
E T 154 (3) E T 254 (3) COMM 265G (3) TE (3) E T 354 (4) E T 355 (3) VWW from College of Business (3) (See Above) TE (3)
Choose one (4)
Choose one (3)
ENGL 218G (3) CHEM 110G(4) E T 241 (3) VWW(3) I E 451 (3) E T 412 (3)
Choose one (3-4)
Choose one (3-4)
Choose one (3)
Choose one (3-4)
Choose one (3)
TE (3) A ST 311 (3) E T 410 (1)
Choose one (3)
Area IV
or
Area V
or
Area VI
(See Above)
Choose one (3)
Area IV
or
Area V
or
Area VI
(See Above)
Choose one (3)
Area IV
or
Area V
or
Area VI
(See Above)
   
Surveying Elective (3)
TE (3)
Choose one (3)
             
16-17 16-17 15 14-15 14 16 16 13
              GRAND TOTAL: 120-123

 

Check Out The Program in Action!


Minors & Concentrations

Civil Engineering Technology offers the following concentrations:

  • Construction Technology
  • Geomatics
  • Renewable Energy Technology
  • Transportation Technology
  • Water/Wastewater Technology

 


Accreditation

Accredited by the Engineering Technology Accreditation Commission of Abet, www.abet.org.

 

The Program Educational Objectives (PEOs) are aligned with the Institution’s mission to serve the educational needs of New Mexico’s diverse population through comprehensive programs of education, research, extension education, and public service. As the state’s land grant university, it is the responsibility of educational programs, especially those in engineering technology, to prepare students to enter the local and regional workforce and engage them in community service along the way. And are further defined below:

1. Student graduates are competent in at least one of the following, as they apply to the local region:

  • Land Development
  • Infrastructure Development
  • Heavy Civil Construction
  • Cost Estimating
  • Characterization and mechanical properties of construction materials

2. Student graduates are proficient in the assessment of Engineering Alternatives.

3. Student graduates are:

  • Meeting the engineering needs of the region, both in the government and private sectors
  • Leaders in their specialized field of endeavor
  • Pursuing professional registration

Student graduates in the NMSU Civil Engineering Technology program will have:

  • An ability to interpret and/or prepare design and construction documents, such as specifications, contracts, change orders, engineering drawings, and construction schedules.
  • An ability to perform economic analyses and cost estimates related to design, construction, and operation of systems in the civil technical specialties.
  • An ability to conduct standardized field and laboratory testing on civil engineering materials.
  • An ability to utilize modern surveying methods for land measurement and/or construction layout.
  • An ability to select and evaluate appropriate engineering materials and practices.
  • An ability to apply basic technical concepts to the solution of civil engineering problems involving: hydrology/hydraulics, geotechnics, structures, material behavior, transportation systems, water/wastewater systems, construction and land development/infrastructure.
  • An ability to perform standard analysis and design in three of the above mentioned technical specialties, specifically: structures, construction and land development/infrastructure.
  • An ability to function effectively as a member or leader on a technical team.
  • An ability to communicate effectively regarding broadly defined engineering technology activities.
  • An understanding of the need for and an ability to engage in self-directed continuing professional development
  • An understanding of and a commitment to address professional and ethical responsibilities including a respect for diversity.
  • A knowledge of the impact of engineering technology solutions in a societal and global context.
  • A commitment to quality, timeliness and continuous improvement.
 

Students graduating with a Bachelor of Science in Engineering Technology with a CET emphasis will exhibit the skills and characteristics specified under the Department’s Program Outcomes. These Outcomes will be evaluated via the following Assessment Tools:

1. Senior capstone courses

One senior capstone course is an assessment tool for the CET option, ET 432 (Applied Design of Structures). Class Assessment Forms for this class is the assessment tool.

2. Performance in specific components of student work

This measure includes extracting specific categories of student work from several classes in order to measure an outcome. For example, the lab portion from several classes is used to measure outcome laboratory and field testing, working in teams, communication and evaluating engineering materials. Class Assessment Forms for specific classes are the assessment tools.

3. Performance in activity or service based learning (club functions/competitions/conferences/projects)

Many students in the CET program are active in several regional and national engineering organizations and competitions. These include: Associated Schools of Construction Students Bidding Competition, American Society of Civil Engineers Concrete Canoe and Steel Bridge Competitions, and Engineers Without Borders.

4. Fundamentals of Engineering Exam

This national exam is used to measure those outcomes dealing with basic knowledge, skills, analysis and design. CET students are compared to their peers on each of the topics covered in the exam.

5. Senior competency exam

The CET Senior Competency Exam (similar to the Fundamentals of Engineering Exam) covers topics from classes up through, but not including, the senior year. The exam is primarily conceptual with calculations needed on 15% of the problems.

6. Certification Tests

Several certification opportunities present themselves to students during their time in the CET Program. Results from these certification tests are used to measure outcomes which deal with field testing, laboratory skills, quality and lifelong learning. Two new certifications were offered in 2016 and 2017. Fall 2016 certification course offered by NMDOT (New Mexico department of Transportation) and ACNM (Associated Contractors of New Mexico) in soils and aggregate. Spring 2017 the certification was in concrete testing through NMDOT and ACNM. The certifications were offered at no cost to the students and were incorporated into the ET 354 and ET 254 classes (Soils and Concrete Technology)

7. FE Practice Exam

As suggested in the 2016 assessment meeting, FE practice exam became one of the measures for outcome. Intermediate exams are given in specific subject areas: Math, Statics, Ethics, Dynamics, Fluids, Materials, Structures, Geo-tech, and Transportation. Added lifelong learning questions to the practice exam are now being used as measures for outcomes.


Faculty

Avatar

John R. Tapia

CET Coordinator
Associate Professor

 

Avatar

Eduardo Gamillo

MET
Assistant Professor

 

Avatar

Ruinian Jiang

CET
Professor

 

Avatar

Luke Nogales

MET Coordinator
Associate Professor

 

Avatar

Kenny Stevens

CET 
Professor

 


Facebook
     
Twitter
     
Instagram
     
You Tube
     
Linked In